|
聯系方式
加關注0
沈陽藍英工業自動化裝備股份有限公司企業會員第17年
資料未認證
保證金未繳納
|
||||||||||||||||||||||||||
橡膠加工分析儀RPA2025 是一種集生膠檢測、膠料加工特性檢測、硫化特性檢測、流變特性檢測以及硫化后動態機械特性檢測于一體的綜合性檢測設備，利用模腔振蕩頻率、剪切應變和試驗溫度的大范圍變化，通過用戶設定各種子測試一次測得硫化前的膠料動態加工性、硫化特性以及硫化后的物理特性。被測材料包括未硫化橡膠、可硫化膠、生膠以及其他熱固性材料，適用于輪胎、橡膠制品、橡膠原材料、石化、軍工以及科研院所等在高分子材料配方研究、新型材料開發、生產過程控制以及替代傳統檢測設備領域里的研究與應用。
Rubber Processing Analyzer RPA2025 is specially designed for tire industry, rubber part factories, raw materials, petrochemicals, military industry and institutes in polymers and new material R&D, production process control to test rubber raw material, uncured rubber, curable rubber and some thermosetting materials by use of the die cavity with its oscillating frequency, shearing strain and temperature in wide range changing to determine their dynamic properties before cure, curability and physical properties post cure by one piece of rubber sample through sub-tests set by users, which test methods are in complied to ASTM D5289, ASTM D6204 and ASTM D6601, as well as other international standards.
規格與參數Data & Specification;
|
國際標準 Standards |
符合ASTM D5289, D6204, D6601及其他有關國際標準 Complied to ASTM D5289, D6204, D6601, etc. |
|
模腔形式 Die Cavity |
密封雙圓錐形模腔，下模腔作往復振蕩 Sealed By-conical, the Lower Die oscillating |
|
扭矩測量 Torque Meas. |
扭矩傳感器, 安裝于上模腔 Torque Transducer mounted on the Upper Die. |
|
驅動系統 Driving System |
直驅伺服驅動 DDR Driving System |
|
振蕩頻率范圍 Frequency Range |
0.01~50.00Hz |
|
振蕩振幅范圍 Amplitude Range |
±0.005°~ ±90.000° (±0.070% ~±1256.000%) |
|
扭矩范圍 Torque Range |
0.010 ~230.000 dNm； |
|
溫控范圍 Temperature Range |
室溫~230.00°C±0.3°C |
|
試樣體積 Sample Volume |
約Appr. 4.5cm3 |
|
子測試形態 Sub-tests |
硫化試驗、預熱、頻率掃描、應變掃描、變溫硫化、… Cure, Time, Frequency Sweep, Stain Sweep, Temperature Variation… |
|
包裝尺寸 Packing Size |
長L=80cm 寬D=80cm 高H=170cm |
|
重 量 Weight |
毛重Gross=312kg; 凈重Net=246kg |
